Width
Check coil width with a tape measure and verify the tolerance against the order.

We send photos and video before loading. SGS, BV or your own inspector is welcome.
Ask on WhatsAppCoils & Sheets
55% aluminum-zinc coated steel coil with longer corrosion life than galvanized at the same coating thickness.
Also called: GL coil, aluzinc coil, galvalume coil, AZ coil
Specs at a glance
| Thickness | 0.16–3.0 mm (thicker on request)Below 0.20 mm is outside the GB scope: supplied to measured thickness with a test report. |
|---|---|
| Width | 600–1250 mm (up to 1500 mm on request); common 914 / 1000 / 1200 / 1219 / 1250 mm |
| Al-Zn coating | AZ20–AZ200 g/m² (double-sided total); common AZ30, AZ40, AZ50, AZ60, AZ70, AZ80, AZ100, AZ120, AZ150Per-side thickness calculated with coating density 3.80 g/cm³ (GB/T 25052). AZ150 = ASTM A792 AZ50 (AZM150). |
| Steel grade | DX51D+AZ / DC51D+AZ (commercial) · S350GD+AZ · S550GD+AZ full hard for roofing |
| Coil weight | 3–10 t (thin gauge typically 3–5 t) |
| Coil inner diameter | 508 mm (standard) or 610 mm |
| Minimum order | 26 t per order; sizes and colors can be mixed in one order |
| Lead time | 7–15 days after deposit |
| Coating composition | 55% Al, 43.4% Zn, 1.6% Si |
|---|---|
| Surface treatment | Passivated (chromate or chrome-free), oiled or dry, anti-fingerprint |
| Tolerances / verification | Dimensions to GB/T 25052-2024; coating mass verified to GB/T 2518-2019 (triple-spot average ≥ nominal, single spot ≥ 85%) |
| Economy option: 25% Al-Zn coating | 0.10–0.80 mm, coating up to 50 g/m²There is no GB/T 2518 code for a 25% Al-Zn coating (the standard covers ZA ≈5% Al and AZ 55% Al). Supplied to measured composition and coating mass with a test report; not sold as 'AZ'. |
| Price basis | EXW / FOB / CIF / CFR |
| Quality documents | Mill test certificate (MTC) or factory quality certificate with every order |
Send these six details. We reply with a written price, lead time and payment terms.
Different sizes can share one container. Freight per ton is lowest when the container is full.
26 MTCoil load per 20 ft container
Plan my container on WhatsAppCheck coil width with a tape measure and verify the tolerance against the order.
Confirm the specified coating against the order and supplier inspection documents.
Width, length, coil weight and labels checked against the packing list

Check the bundle, straps and loading arrangement.
Third-party inspection (SGS, BV or your own inspector) is welcome.
Waterproof paper, plastic film and steel strapping; seaworthy export packing
About 26 MT per 20 ft container

Mon–Sat, 9:00–18:00 China time (GMT+8)
Mr. Wang, General Manager
Room 905-A533, No. 26 Jinlong Road, Nansha District, Guangzhou, Guangdong, China
View on map