Building envelope
We supply metal-faced panels for exterior walls, roofs and interior partitions, with rock wool, glass wool or polyisocyanurate / polyurethane (PIR / PUR) cores. Start with the application and core, then choose the joint, thickness and cover width, facings and coating, and matching accessories.
01 / PRODUCT DETAILS
Rock wool and glass wool panels use PU edge sealing. Each core series has its own joint section. Expressed and flush describe the joint appearance, not whether fixings are exposed or concealed.
Rock wool core with polyurethane (PU) edge sealing. The expressed joint leaves a visible joint line. Add the required facing texture, width and thickness to your enquiry for this series.
Enquire about this item
Rock wool core with polyurethane (PU) edge sealing. The flush joint gives a flatter joint appearance. Add the required facing texture, width and thickness to your enquiry for this series.
Enquire about this item
Glass wool core with polyurethane (PU) edge sealing. The expressed joint leaves a visible joint line. Add the required facing texture, width and thickness to your enquiry for this series.
Enquire about this item
Glass wool core with polyurethane (PU) edge sealing. The flush joint gives a flatter joint appearance. Add the required facing texture, width and thickness to your enquiry for this series.
Enquire about this item
PIR / PUR core. The expressed joint leaves a visible joint line. Add the required facing texture, width and thickness to your enquiry for this series.
Enquire about this item
PIR / PUR core. The flush joint gives a flatter joint appearance. Add the required facing texture, width and thickness to your enquiry for this series.
Enquire about this item| Item | Options for these wall series |
|---|---|
| Outer steel | 0.5–0.8 mm |
| Inner steel | 0.4–0.6 mm |
| Outer coating | PVDF (polyvinylidene fluoride) / HDP (high-durability polyester) / SMP (silicone-modified polyester) / PE (polyester) |
| Inner coating | SMP (silicone-modified polyester) / PE (polyester) |
| Facing profile | Fine ribs, medium ribs, wide ribs, embossed or flat |
Specify the steel-sheet thickness basis in the quote: base metal or finished coated sheet. Panel thickness is a separate dimension. The rock wool dimensions below apply only to that series; glass wool and PIR / PUR dimensions are checked separately.
02 / PRODUCT DETAILS
This PU-edge-sealed rock wool wall series has 980 mm cover with an expressed joint and 1000 mm cover with a flush joint. Use cover width C for the panel layout.
| Joint | Designation | Cover C | Thickness D |
|---|---|---|---|
| Expressed | 1000 × 50 | 980 | 50 |
| Expressed | 1000 × 75 | 980 | 75 |
| Expressed | 1000 × 100 | 980 | 100 |
| Flush | 1000 × 50 | 1000 | 50 |
| Flush | 1000 × 75 | 1000 | 75 |
| Flush | 1000 × 100 | 1000 | 100 |
B = 1000 mm in the referenced sections. These thickness and cover combinations apply to this rock wool wall series only.
03 / PRODUCT DETAILS
These are facing options for the wall panels above. Choose the core series and joint first. In “Your requirements”, specify the core, joint type, facing texture and coating.
Optional fine ribs facing for the selected wall panel. In “Your requirements”, specify the core, joint type, facing texture and coating.
Ask about this option
Optional medium ribs facing for the selected wall panel. In “Your requirements”, specify the core, joint type, facing texture and coating.
Ask about this option
Optional wide ribs facing for the selected wall panel. In “Your requirements”, specify the core, joint type, facing texture and coating.
Ask about this option
Optional embossed facing for the selected wall panel. In “Your requirements”, specify the core, joint type, facing texture and coating.
Ask about this option
Optional flat facing for the selected wall panel. In “Your requirements”, specify the core, joint type, facing texture and coating.
Ask about this option04 / PRODUCT DETAILS
Roof panels are offered with three core constructions. Panel thickness, cover width and lap details follow the selected series.
Rock wool core with PU edge sealing and a profiled roof facing; match the product-specific lap and closures.
Enquire about this item
Glass wool core with PU edge sealing; confirm this series’ panel thickness, width and joint.
Enquire about this item
PIR / PUR core with the corresponding roof-panel lap; dimensions and accessories are confirmed for the selected product.
Enquire about this item| Item | Order information |
|---|---|
| Outer / inner steel | Outer 0.5–0.8 mm; inner 0.4–0.6 mm |
| Roof accessories | Ridge caps, lap seals, closures, flashings and fixings |
Select the complete roof-panel and joint configuration before ordering accessories.
05 / PRODUCT DETAILS
These combinations apply to the illustrated PU-edge-sealed rock wool panels. Base thickness D, rib height R and overall height H use the separate measurement references shown on the section.
| Profile | Cover | Base D | Rib R | Overall H |
|---|---|---|---|---|
| Roof | 1000 | 50 | 35 | 85 |
| Roof | 1000 | 75 | 35 | 110 |
| Roof | 1000 | 100 | 35 | 135 |
| PV roof | 1000 | 50 | 36 | 87 |
| PV roof | 1000 | 75 | 36 | 112 |
| PV roof | 1000 | 100 | 36 | 137 |
Overall height H for the PV panel in this rock wool series is 87 / 112 / 137 mm. Refer to the corresponding section drawing for each measurement position; H cannot be calculated by simply adding D and R.
06 / PRODUCT DETAILS
Interior panels use rock wool or glass wool with PU edge sealing. Mark the two faces A and B on the partition drawing, then specify each face’s steel thickness, coating and texture.
PU-edge-sealed rock wool interior panels, with matching base, head, corner and opening trims.
Enquire about this item
PU-edge-sealed glass wool interior panels, with selected facings, joint, fixings and seals.
Enquire about this item| Item | Order information |
|---|---|
| Face A steel | 0.5–0.8 mm |
| Face B steel | 0.4–0.6 mm |
| Finish on each face | Specify the coating, texture and colour separately for A and B |
| Panel configuration | Core, panel thickness, width, length and surface profile |
| Edges & fixing | Base, head, corner and opening trims; fixings and seals |
A and B identify the two panel faces, not their orientation. Mark each face on the drawing and use the same labels in the quotation to specify its steel thickness, coating and colour. Confirm panel width and thickness for the selected interior-panel series.
07 / PRODUCT DETAILS
Select special roof and wall profiles to the project requirements, with the corresponding joint, clamps and fixing arrangement.
Rock wool PV roof profile with matching clamps, fixings and flashings. Use the dimensions for the selected section in the rock wool roof table above.
Enquire about this item
PIR / PUR PV roof profile; confirm its own section, dimensions, clamps and fixing arrangement.
Enquire about this item
Wall panels with a perforated inner facing; specify the core, joint and required performance for the project.
Enquire about this item
Roof panels with a perforated inner facing; confirm the core, roof joint, fixings and required performance.
Enquire about this item08 / PRODUCT DETAILS
These details identify accessory packages for the selected panel. When enquiring about trims, supports, fixings or seals, include the panel series, joint type and junction drawing in “Your requirements”.
Vertical rails support the corner detail, with corner trims selected for the wall-panel joint.
Ask about this optionSupport pieces and base flashings follow the wall-base detail.
Ask about this optionLap seals and support angles follow the selected roof-panel lap.
Ask about this optionRidge caps and closures are matched to the roof-panel section.
Ask about this option09 / PRODUCT DETAILS
Roof sheets, wall cladding and sandwich-panel facings have white, grey, black, blue, green and warm-colour references. Request a colour sample with the sheet or panel specification.
804 White Grey and 404 Sea Blue are supplier references, not RAL colour codes. Include the reference and selected sheet or panel in your sample enquiry.
Enquire about this itemFor another colour or RAL match, send the required colour reference. Availability is checked for the selected coating; final colour is agreed against a physical sample.
Enquire about this itemENQUIRY CHECKLIST
Specifications, matching parts and document requirements are confirmed for each order.
| Item | Information to provide |
|---|---|
| Panel series | Use, core, edge sealing, joint form, cover width, thickness and cut length |
| Metal facings | Exterior/roof panels: outer and inner faces; interior panels: faces A and B as marked on the drawing. Specify steel thickness, texture, coating and the agreed colour sample for each face. |
| Project interfaces | Panel layout, corners, bases, openings, roof laps, ridges, clamps, fixings and seals |
| Special requirements | Required performance and applicable project documentation for the selected panel configuration |
START YOUR ENQUIRY
A short description is enough for a first enquiry. Share the details you already have, then we can clarify the rest.
Request a quotesales@vanrely.com